power entry modules with line filter kfx www.schurter.com/pg0 6 emc products iec appliance inlet c14 with filter, increased dielectric strength c14 70 c description - panel mount: screw-on mounting from front side - 2 functions: appliance inlet protection class i, line-filter in standard version - quick connect terminals 6.3 x 0.8 mm approvals - vde license number: 40004665 - ul license number: e72928 characteristics - compact design with optimal shielding - all single elements are already wired - universal line filter for standard applications with enhanced surge withstand voltage - qualified for use in equipment according iec/en 60950 references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 1 - 10 a @ ta 40 c / 250 vac; 50 hz ratings ul/csa 1 - 10 a @ ta 40 c / 125 vac; 60 hz leakage current standard < 0.5 ma (250 v / 60 hz) dielectric strength > 1.7 kvdc between l-n > 2.7 kvdc between l/n-pe test voltage (2 sec) impulse withstand voltage > 4 kv between l-n (cx1) > 5 kv between l/n-pe allowable operation temp. -25 c to 85 c climatic category 25/085/21 acc. to iec 60068-1 degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm material: housing thermoplastic, black, ul 94v-0 appliance-inlet/-outlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 line filter standard version, iec 60939, iec 60601-1, ul 1283, ul 544, en 133 200, csa c22.2 no. 8 technical detail s mtbf > 3'100'000 h acc. to mil-hb-217 f dimensions 28 40 49 +1 0 23.3 19.7 0.3 r 3.5 r 6.6 61.5 67 54 (5.5) 3.5 ? 3.3 ? 5.8x90? kfx 28.5 +0.5 0.0 m3 r3 21.5 +0.5 0.0 40.00 0.15
power entry modules with line filter kfx www.schurter.com/pg0 6 emc products technical data of filter-components rated current [a] filter-type inductances l [mh] capacitance cx [nf] capacitance cy [nf] 1 standard version 2 x 10 47 2.2 2 standard version 2 x 4 47 2.2 4 standard version 2 x 1.5 47 2.2 6 standard version 2 x 0.8 47 2.2 10 standard version 2 x 0.3 47 2.2 diagrams standard version 1) line 2) load attenuation loss - - - - differential mode _____ common mode standard version 1 a 2 a 4 a 6 a 10 a variants type rated current [a] filter-type cx class order number kfx 1 standard version x1 4300.5061 kfx 2 standard version x1 4300.5062 kfx 4 standard version x1 4300.5063 kfx 6 standard version x1 4300.5064 kfx 10 standard version x1 4300.5065 packaging unit 10 pcs
power entry modules with line filter kfx www.schurter.com/pg0 6 emc products accessorie s description assorted cover s rear cover 0859.0048 cord retaining kit s cord retaining strain relief flat head, z 0888.0021 countersunk, c 4700.0003 mating outlets/connector s category / description appliance outlet overview complet e iec appliance outlet f, screw-on mounting, front side, solder or quick-connect terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outlet further types to kf x connector overview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connector further types to kf x ... power cord overview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cord further types to kf x ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|